2 FLAVOR HOME SODA FOUNTAIN SYSTEM / NEW Remote Chiller

Description

Complete Remanufactured 4-Flavor Tower System with Remote Cooler
Complete,
remanufactured
, two (2) flavor tower soda fountain system with
new
remote chiller
. It can be used for residential or commercial applications. The stainless dispenser is compact in size and blends in a variety of settings without eating up valuable counter space.
This system uses a remote chiller for refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice.
System has been set up to dispense two (2) flavors; any combination of carbonated and non-carbonated beverages. Both valves are capable of dispensing post-mix bag-in-box product. System will come with push-button or lever valves depending on our inventory. One of the valves can have a secondary lever for soda water or plain water only (you must specify this feature when you place your order).
We will set up the system to accommodate your choice of post-mix bag-in-box flavors at
no additional cost
. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included:
Two (2) NEW syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO
2
regulators, high pressure hosing, carbonator, and
new
remote chiller.
You need to supply water, electricity, syrup, and CO2.
Soda Dispenser Depot carries a full line of soda fountain dispenser systems, parts, and a boat-load of information!
WE HAVE HUNDREDS OF MACHINES TO CHOOSE FROM!!
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
REMOTE CHILLER SPECIFICATIONS
DIMENSIONS Width: 10.375" (264 mm) Depth: 19.688" (500 mm) Height: 23.5" (597 mm) WEIGHT Shipping: 108 lbs (49 kg) With water: 145 lbs (66 kg) ELECTRICAL 115VAC/60Hz, 7AMPs FITTINGS Stainless steel inlet and outlet labeled 3/8" barb COMPRESSOR 1/4 hp MOTORS Agitator: 15 W Condenser Fan: 9 W
This is a
remanufactured system
. All of the tubing is
new
. The support equipment is
remanufactured
(unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.