Aquarium Water Return Line Kit for Wet Dry or Refugium Sump

Description

Return Line Kits
Aqua-Link ADP J-tube diffuser return line (Kits) are made of; durable break resistant,
Chlorinated Polyvinyl Chloride.
Some gluing may be required depending on positioning of parts and set up application. Follow packing slip information to learn how to acquire set-up instructions.
The Gentle 180 degree molded J-shape enables greater water flow, without the restrictions found in other brands that use multiple 90 degree bends.
These J- tubes are available in 3 standard diameter reaches to accommodate multiple aquarium frame widths. Each kit comes standard with our (most popular) 1-3/8” Diameter Reach J-tube by default. However, a choice of either 1-7/8” or 2-3/8” may be swapped with the default, but such a request must be made with your order via eBay message before your item is shipped. on
The Advanced Kits come with tight fitting adjustable nozzle parts so desired directional flow can be achieved. However these parts are able to be permanently glued only if desired or needed.
Advanced Return line kits, will include a back flush siphon break feature designed to disrupt a siphon and prevent excess water from back flushing into your sump in the event of a power failure. This feature allows you to extend the return line deeper into the aquarium providing better water circulation in hard to reach areas without using additional power heads. This feature is also adjustable to re-direct back pressure into the aquarium preventing misdirected back spray inside the aquarium hood.
Duck Bill diffuser nozzle tip(s) are included with “Advanced Kits”. These nozzles are designed to spread water out over a broader area for more efficient water circulation. Adjustable nozzle tips can be rotated to direct this spread where you desire.
Please review all descriptions below so you can select a kit suitable for your needs.
**Colored company logos or placards may not be included**
Generic Kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube. Default Diameter Reach 1-3/8”
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)     Ratchet hose clamps. (appropriately sized)
** Note; back flush siphon break feature is not available with “Generic” Kits**
Advanced Kits
Single Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon interrupt feature (Default Diameter       Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(1)     Elbow (90°)
ü
(1)     Elbow (45°)
ü
(1)     Duck Bill Diffuser Nozzle.
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)     Ratchet hose clamps. (appropriately sized)
Dual Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon interrupt feature (Default Diameter       Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(2)     Elbow (45°)
ü
(2)     1” Rotation connectors.
ü
(2)     Duck Bill Diffuser Nozzle.
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)     Ratchet hose clamps. (appropriately sized)
ü
(1)     Tee fitting.
Multiple Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon interrupt feature (Default Diameter       Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(2)     Tee fitting.
ü
(1)     Elbow (90°)
ü
(2)     Elbow (45°)
ü
(2)     Tee fitting.
ü
(3)     1” Rotation connectors.
ü
(3)     Duck Bill Diffuser Nozzle.
ü
(2)     ⅝” od x ½” id x 6” Extension pipes
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)     Ratchet hose clamps. (appropriately sized)
Return policy details:
Please review the item descriptions and make sure that sizes, model numbers etc. are what you want before purchase. There is absolutely NO RETURNS for any reason other than the item NOT being what is represented in the ad, and in the main photo of each variation. Seller reserves the right to include, exclude, change design, size, color, or location, of manufacturers logos and placards. Such changes shall not be determined as a misrepresentation or defect of the condition or intended functional properties of the product sold. Claims must be made within 30 days of receipt. Buyer remorse, buyer purchasing wrong items on accident or on purpose, i.e. wrong sizes, wrong model numbers, not liking the item once it arrives etc. are in no way the responsibility of the seller and refunds
WILL NOT be given.
If a defect is suspected, and before a return request is considered, the buyer must comply with all examination requested by the seller, i.e. supporting photos, claim reports, etc. up to and including packaging and return postage prepaid by the buyer. Seller reserves the right to repair or replace only the particular item or items suspected of functional defect.
In the unfortunate event that your order is damaged during transit, contact us and the carrier immediately within 24 hours The faster you report damage to the carrier, the faster the claim process will be completed (subject to approval by carrier). All return shipping cost is the Buyer’s responsibility.
1.
Do not throw away anything until the return or claim process is completed.
2.
Be sure to keep all original packaging, materials and parts. Any non-working returns that are damaged or have missing items will incur additional charge.